Skip to main content
Regina & area concrete contractor · Free written estimates
(306) 994-0126

Residential · Garage Floors

Sealed Garage Floors in Regina That Last Through Winter

Your garage floor endures salt spray, freeze-thaw cycles, hot tire marks and spilled fluids every season. A properly sealed slab with epoxy, polyaspartic or polished concrete turns that bare concrete into a durable, easy-to-clean surface. We start every project with a free written estimate and ground-level assessment.

  • Grind or shot-blast every slab
  • Five coating and finish options
  • Written estimate with firm timeline

Surface preparation

How Concrete Prep Determines If Your Garage Floor Coating Survives

A coating fails not because of the product, but because the concrete underneath was not ready. Dust, old sealer, moisture or a sealed surface will cause any coating to peel within months, usually in the tire tracks where the slab gets the most stress.

We grind or shot-blast the slab to expose fresh concrete, repair any cracks or spalling, and test for moisture before the first coat goes down. This profiling step is what separates a coating that lasts from one that flakes.

Once the slab is sound, we apply the full system to spec. Epoxy coatings offer proven durability at a fair price. Polyaspartic systems cure fast and resist UV fading. Metallic epoxy delivers a custom marbled look. For a no-coat option, polished concrete hardens the slab itself.

Recent work
epoxy-coated garage floor with an EV charger at a Regina home
metallic epoxy garage floor with a swirl pattern in Regina

Installation sequence

The Steps to Finishing Your Garage Floor Right

  1. Inspect the slab for moisture and damage

    We assess the concrete for cracks, pits, old sealers and moisture content, then recommend the coating system that fits your use and timeline.

  2. Grind or shot-blast the surface

    Mechanical grinding or shot-blasting opens the concrete profile, removes contaminants and prepares the slab so the coating bonds properly.

  3. Repair and fill the concrete

    We patch cracks and pits with concrete repair compound, ensuring a smooth, sound base for the coating layers.

  4. Apply primer, body and topcoat

    The full coating system goes down per manufacturer specs, with flake or metallic pigment if chosen, then a protective topcoat.

  5. Cure and hand off

    The coating cures per schedule, we walk the floor with you, and you receive care instructions and the timeline for returning to service.

System selection

Choose the Garage Floor Finish That Fits Your Needs

The right coating depends on how you use the space and how quickly you need it back in service. Epoxy is the most popular choice, offering a tough, sealed surface with flake color at a reasonable cost. Polyaspartic costs more but cures in roughly a day, making it ideal if you cannot lose the garage for long.

For a showroom appearance, metallic epoxy creates a unique marbled effect that still handles dropped tools and tire marks. If you prefer no coating at all, polished concrete hardens and seals the slab itself for a low-sheen, durable finish. When a previous coating has failed, garage floor repair strips it completely and rebuilds the system correctly.

Compare all options
before and after of an epoxy garage floor coating
5 Finish options
~1 day Polyaspartic cure
4.9★ Homeowner rating

Common questions

Garage Floor Coating Questions Answered

Prep, systems, durability and cost for Regina garage floors.

Coatings peel when they are applied over an unprepared slab. We mechanically grind or shot-blast every floor to a clean profile and check for moisture first, so the coating bonds to sound concrete instead of dust or old sealer.
Epoxy is the proven, cost-effective workhorse. Polyaspartic costs more but cures in about a day and holds its colour under UV. We match the system to how the garage is used and your timeline.
Yes, when it is the right system on a properly prepped slab. Epoxy, metallic and polyaspartic coatings are built to resist de-icing salt, moisture and hot-tire pickup, which is exactly what a Regina garage throws at a floor.
Coatings generally run $4 to $9 per square foot depending on the system, the slab condition and how much repair the concrete needs first. We confirm it with a written, itemised quote after seeing the floor.
Yes. Garage floor repair strips the failed coating, re-profiles the slab, repairs the concrete and rebuilds the system properly so the new finish actually bonds and lasts.

Homeowner reviews

What Regina Homeowners Say About Their Garage Floors

★★★★★ 4.9 · 87 reviews on Google
Read all reviews →
★★★★★

They ground the slab right back before coating it, you could see the difference. A full winter of salt and slush later it still wipes clean.

G. S.
Regina
★★★★★

Went with polyaspartic because we could not lose the garage for long. Coated one day, parking on it the next, and the colour has not faded.

R. M.
Emerald Park
★★★★★

Metallic epoxy in the shop garage. It genuinely looks like a showroom and it has shrugged off dropped tools and hot tires all year.

T. B.
Pilot Butte
★★★★★

Previous coating from another company peeled in a season. These guys stripped it, re-profiled the slab and redid it properly. Night and day.

C. H.
White City

Ready to start

Schedule Your Free Garage Floor Estimate

Describe how you use the garage and we will recommend the right coating or finish, assess the slab condition, and provide a written, itemised quote with a firm completion date.

We'll evaluate the concrete and send a written coating quote within one business day.