Regina Concrete works from your structural drawings and floor spec to build warehouse slabs, manufacturing facilities, food-processing plants and cold-storage floors. We handle the slab engineering, laser-screeded flatness, joint detailing, concrete pumping and ready-mix coordination. One licensed crew, one written estimate, one schedule built around your operation.
Whether it's a distribution centre slab, a manufacturing plant floor, a food-processing facility or a cold-storage pour, the same crew works to your spec, load numbers and flatness tolerance. Select a service to learn more.
A distribution centre floor lives under relentless pressure: loaded reach trucks, pallet drops, racking posts bearing thousands of pounds per square inch. The slab has to be engineered for it. Thickness, reinforcement, base prep, and a laser-screeded surface within flatness tolerance are not optional. Joints are detailed to the rack layout and filled with semi-rigid material so edges don't spall under hard-wheel traffic.
That same engineering principle applies across every facility type. Manufacturing plants need heavy-duty slabs for equipment and process loads. Food processing requires washdown-ready epoxy and urethane systems. Cold storage floors must handle thermal cycling without cracking or lifting.
When the pour is large or the site access is tight, our concrete pumping service keeps material flowing continuously. We also coordinate ready-mix delivery so the slab cures evenly and gains strength on schedule. That's how industrial concrete actually performs.
You send structural drawings, floor spec, load ratings, flatness numbers, mix design and joint layout. We review everything and schedule a site visit to confirm conditions and access.
Prepare base and set reinforcement
Subgrade is prepped and compacted to grade. Rebar, wire mesh and embeds go down per the drawings. We confirm the mix design and joint plan before ordering any concrete.
Place and finish to tolerance
Concrete is placed using laser screeds and finished to the specified flatness. Joints are saw-cut on layout and on schedule. Our pumping keeps large pours continuous and even.
Cure, fill joints and hand off
The slab cures under controlled conditions. Joints are filled with semi-rigid material. Flatness and load readings are taken where the spec requires them. The floor is ready for racking and traffic.
Common questions
Industrial Concrete Questions, Answered
Load ratings, flatness tolerance, joint detailing and compliance on an industrial concrete project in Regina.
Yes. We build warehouse and distribution floors and plant slabs to the load rating, slab thickness and FF/FL flatness numbers in the spec, using laser screeds and a controlled finishing sequence, and we provide the readings.
Usually. We phase industrial pours bay by bay, work off-shift where it matters, and stage the work so production keeps moving while one area cures and gains strength.
Yes. We run concrete pumping for hard-to-reach and high-volume placements and coordinate ready-mix supply so large pours stay continuous.
Joints are laid out to the spec and the rack layout, saw-cut on time, then filled with a semi-rigid filler so edges hold up under hard-wheel forklift traffic.
New warehouse slab poured to our FF/FL spec and signed off with the readings. Racking went in straight and the forklifts run smooth across every joint.
R. T.
Distribution centre manager
★★★★★
Replaced a failing process-area floor with a food-grade urethane system. It handles the washdowns, drains properly, and passed our sanitation audit.
K. W.
Food plant maintenance
★★★★★
Poured heavy equipment pads and a wash bay on a working yard. They phased it so we never lost the shop, and the slabs take the loaders fine.
D. H.
Fabrication shop owner
★★★★★
Cold storage slab done right, thermal breaks, the correct mix, flat and tight joints. A year of cycling later there is no spalling or lift.
M. B.
Facilities engineer
From the blog
Concrete Guides & Articles
Practical reading on planning, finishes and caring for concrete in Regina.
Warehouse slab, manufacturing floor, food-processing facility, cold-storage pour or a pumping and supply package. Send us the spec and drawings and we'll schedule a site review with a written quote and a schedule built around your operation.
