Precision Concrete Flooring for EV Battery & Technology Manufacturing
Battery production and semiconductor assembly require floors that perform three jobs simultaneously: dissipate static electricity, resist aggressive production chemistry, and maintain flatness tolerances tight enough for robotic systems. Regina Concrete engineers and installs grounded ESD systems and clean-room concrete floors that meet those demands, with testing and certification built into the process.
Why EV Battery Concrete Floors Aren't Standard Industrial Work
A static spark from an ordinary concrete floor can destroy a battery cell or trigger a thermal event. Particulate from a poorly sealed slab contaminates a clean room. Uneven concrete throws off AGV navigation and slows robotic assembly lines. These aren't minor issues, they're production stoppers.
Our ESD manufacturing concrete systems ground the floor to a real electrical ground and test the resistance and decay times to spec. Our cold-storage and precision flooring work follows the same discipline: measure twice, install once, verify after.
Both approaches start with a clean concrete profile, then layer the system to handle the chemistry and the electrical load. The difference between a floor that works and one that fails shows up in your audit, your downtime, or your product quality.
Recent work
Installation sequence
How EV & Technology Concrete Floors Get Built in Regina
Assess the spec and site
We review the clean-room classification, ESD requirements, production chemistry, flatness tolerance and operational constraints to design a floor that fits the process.
Prepare the slab
We grind or shot-blast the existing concrete to a clean profile, test for moisture, repair cracks or low spots, and level the surface to tolerance.
Install the system
We apply the matched ESD or clean-room flooring system per manufacturer spec, including grounding straps, coved edges and seamless detailing required by the protocol.
Test and hand off
The floor cures fully, ESD performance is tested where required, and the space is ready for your certification and production startup.
Built to last and perform
What Separates Precision Concrete Flooring from Shortcuts
A clean-room floor only works if it is actually built to be cleaned. Seamless, coved concrete with the right finish allows your protocol to be enforced, not just claimed. A floor with lippage or poor detailing will fail your audit or harbor contamination.
An ESD heavy-duty concrete floor needs grounding tied to a real electrical ground and tested for resistance and decay time, not just labelled ESD. We follow the same rigor on warehouse flooring and food-processing concrete. The difference is measurable: fewer static events, lower particulate counts, faster AGV cycles, and audits that pass on the first review.
Clean rooms, ESD, chemical resistance and controlled environments in Regina.
ESD flooring is a grounded, anti-static floor system that dissipates static. EV battery and electronics production need it because a static discharge from a normal floor can damage cells, components or trigger an event.
Yes. Clean room concrete floors are flat, seamless and coved, with the chemistry, particulate control and detailing the protocol requires, installed so the room can actually be certified.
It has to do three things at once, ground the floor electrically, resist the production chemistry, and hold a flatness tolerance so AGVs and robotics run true. A standard industrial floor does not deliver any of those by default.
Yes, where the spec requires it. The grounding is tied to a real ground and tested for the resistance and decay-time numbers in the spec, not just installed and assumed.
Yes. We phase the work around the production schedule, isolate the area, grind back to a clean profile and install the system zone by zone, so the operation keeps moving while the floor gets built right.
Client reviews
What Regina Tech Facilities Say About Their Precision Concrete Floors
ESD floor system through the assembly cells, grounded and tested. We have not had a static event in a year and our particulate counts are inside spec every audit.
H. K.
Battery production lead
★★★★★
Coved, seamless and dead flat. The clean-room protocol actually works because the floor was built to be cleaned, not just labelled clean-room.
B. A.
Clean-room operations
★★★★★
Phased it cell by cell so production never stopped. The new floor is flat enough that our AGVs run a measurable amount faster and quieter.
S. M.
Technology facility manager
★★★★★
They asked the right questions about chemistry, flatness and grounding before they quoted. That alone separated them from the contractors who just sell coating.
T. P.
EV manufacturing engineer
From the blog
Concrete Guides & Articles
Practical reading on planning, finishes and caring for concrete in Regina.
Describe your clean-room or ESD requirement, the production chemistry, and your operational windows. We will engineer the floor system and deliver a written, itemised quote.
