Skip to main content
Regina & area concrete contractor · Free written estimates
(306) 994-0126

Driveways · Sealing

Protect Your Driveway Sealing in Regina

A sealed driveway outlasts an unsealed one by years. Winter in Saskatchewan means freeze-thaw cycles and road salt working concrete apart from the inside out. Sealing closes the pores and stops water and salt from penetrating the slab. Regina Concrete applies the right sealer for your finish every two to three years, starting with a free on-site assessment.

  • Sealer matched to your concrete finish
  • Blocks salt and moisture penetration
  • Free assessment, written quote

The science of sealing

Why Concrete Sealing Stops Damage Before It Starts

Concrete is porous. Water soaks into those tiny holes, freezes when the temperature drops, and expands as ice. That expansion cracks the surface from inside, spalling off flakes of concrete. De-icing salt makes it worse by lowering the freezing point, so the freeze-thaw cycle runs more often each winter.

A sealer fills the pore network and creates a barrier. Water and salt cannot penetrate, so the freeze-thaw cycle cannot happen inside the slab. The result is a driveway that stays intact, keeps its colour, and resists the wear that makes concrete look old.

Different finishes need different sealers. A stamped patio requires a different product than a washed aggregate driveway. We assess the finish and pick the sealer that bonds properly and lasts the full cycle.

Recent work
sealed concrete driveway at a Regina stucco home
close-up of a sealed concrete driveway surface in Regina

The sealing process

How We Seal Your Driveway Step by Step

  1. Assess the slab condition

    We walk the driveway, identify the finish type, and look for cracks, spalling, or stains. Any damage that needs driveway repair gets flagged before sealing begins.

  2. Clean and prepare

    Pressure washing removes dirt, oil, and salt residue. The concrete is allowed to dry completely so the sealer can bond to the surface without trapping moisture underneath.

  3. Apply sealer at spec

    The product is applied at the manufacturer's coverage rate, with even coats and no pooling. Some systems need two coats; we follow the product schedule exactly.

  4. Cure and schedule next visit

    The seal cures for 24 to 48 hours before the driveway is back in use. We note the reseal date so you know when to call for the next cycle.

Maintenance rhythm

When to Reseal and What Signs to Watch

Most Regina driveways need resealing every two to three years. Stamped concrete sits at the shorter end of that range because the texture holds sealer differently. Plain brushed finishes can sometimes stretch to three years. The real indicator is water beading: when water no longer beads up and instead spreads flat, the seal is worn through.

Watch for colour fading, a dull or chalky surface, salt stains that don't rinse away, and small pits where freeze-thaw is starting to win. Catching these early means a reseal fixes them. Ignoring them turns into driveway repair work the next season. Check the full driveway service menu for all your options.

Schedule a sealing visit
well-maintained sealed concrete driveway at a modern Regina home
2 to 3 Years between reseals
Matched Sealer to finish
Free Quote

Homeowner questions

Driveway Sealing Questions Answered

Reseal timing, sealer types, finish-specific care and what to watch for in Regina.

Generally every two to three years. Decorative finishes like stamped concrete often want a shorter interval; plain brushed finish can stretch slightly longer. The tell is when water stops beading on the surface.
Yes, but most DIY sealing fails because the prep is too light, the sealer is wrong for the finish, or the coverage rate is off. Done pro-grade, sealing is a couple-year investment; done wrong, it can trap moisture and accelerate damage.
A little. Sealer brings up the colour of the concrete, especially on exposed aggregate and coloured concrete. The look is usually richer; if you want a matte finish, we can pick a matte sealer.
Yes, ideally. Sealer over an open crack just fills the crack with sealer temporarily; the crack still opens with freeze-thaw. Crack repair first, then sealing, is the durable order of operations.
Typically about 30 days. Concrete needs to release its initial moisture before a sealer goes on, otherwise the sealer can fog or fail to bond. We schedule the first seal at the right window after a new pour.

Homeowner reviews

What Regina Homeowners Say About Their Driveway Sealing

★★★★★ 4.9 · 87 reviews on Google
Read all reviews →
★★★★★

Reseal every couple of years. The driveway looks decades younger than its actual age and we have never had spalling, even after our worst freeze-thaw winters.

C. O.
Regina
★★★★★

They explained which sealer matched our exposed-aggregate driveway. The water beads up properly again and the colour is brighter than it has been in years.

F. E.
Emerald Park
★★★★★

Caught a few small cracks during the seal inspection, repaired them first, then sealed. Honest about what to do in what order, did not push extra work.

N. M.
White City
★★★★★

Stamped patio resealed on schedule for three years running. The colour and pattern still pop, exactly like the first year.

S. J.
Regina

Ready to seal

Get Your Free Driveway Sealing Estimate

Whether your driveway is due for a reseal or your new pour just hit the 30-day mark, we assess it free, recommend the right sealer, and send a written quote the same day.

We'll inspect your driveway and provide a written sealing quote within one business day.