When a standard epoxy garage floor won't hold up to heavy use, RockSolid polycuramine delivers the durability. This Rust-Oleum system cures in one day, resists hot-tire pickup, and handles abrasion from tools and chemicals. Regina Concrete applies RockSolid with the precision its fast-set chemistry demands. Free written estimate included.
Polycuramine and epoxy are different chemical systems. RockSolid's polycuramine base cures faster (same day vs. a week), resists abrasion better, and does not soften under hot tires the way epoxy does. When a sports car or truck parks in the garage with hot tires, standard epoxy can lift slightly; polycuramine stays bonded to the slab.
Heavy-use garages benefit most from this upgrade. If your space sees multiple vehicles daily, hobby work with dropped tools, or chemical spills, RockSolid justifies its cost. For lighter residential use, our EpoxyShield option remains the value choice. We also offer broader garage floor solutions and can discuss polished concrete alternatives if the budget or use case shifts.
Commercial and industrial applications may benefit from forklift-rated epoxy or other specialized coatings depending on the facility type and traffic load.
Recent work
Installation sequence
How RockSolid Installation Unfolds in Regina
Grind the slab to spec
The concrete garage floor is diamond-ground to the profile RockSolid requires. Contaminants, old coatings, and surface debris are removed, leaving a clean substrate ready for primer adhesion.
Apply matched primer
Rust-Oleum's primer formulated for RockSolid is rolled onto the prepped slab. This primer layer ensures the polycuramine top coat bonds permanently and performs as designed.
Mix and apply body coat
Once mixed, RockSolid has a tight working window. The crew applies the polycuramine body coat at the correct film thickness. Decorative flakes can be broadcast into the wet coat if chosen.
Fast cure and handoff
RockSolid cures dramatically faster than epoxy. Foot traffic is typically safe the same day; vehicle traffic the next day. The garage returns to full use within the cure window.
Right choice for
Heavy-Use Garages Need RockSolid Durability
RockSolid shines in garages that work hard. Multiple vehicles, hot tires from summer drives, hobby work with dropped tools, chemical spills from maintenance, and daily foot traffic all add up. Standard epoxy wears faster under these conditions; polycuramine holds its finish longer.
The cost premium over EpoxyShield is real, but the extended service life on heavy-use floors often justifies the investment. We recommend RockSolid only when the garage's actual use supports it. For moderate residential use, EpoxyShield remains the better value. See our full brand lineup and epoxy garage floor services for the complete picture.
Polycuramine chemistry, hot-tire resistance, cure timing, and cost.
RockSolid for heavy daily use, hot-tire exposure, hobby work that drops tools or chemicals. EpoxyShield for moderate residential use where price matters more than maximum durability. We will recommend based on actual use.
Yes, it is the most common epoxy garage floor failure pattern. Standard epoxy softens slightly under hot tires; when the car drives off, a thin layer of epoxy lifts with the tire. Polycuramine resists this; the floor stays where it was poured.
Foot traffic typically the same day; vehicle traffic typically the next day. Compared to epoxy's multi-day cure, RockSolid returns the garage to service dramatically faster, which matters when the garage is heavily used.
Yes, once mixed RockSolid has a much shorter working window than epoxy. Pro install matters more for RockSolid than EpoxyShield because the application has to happen in a tight time window without errors.
The product is more expensive per gallon than EpoxyShield, and the labor cost is slightly higher because the working window demands more crew coordination. The total install premium varies by garage; we quote both options so you can decide.
Three cars in the garage daily including a sports car with hot tires after summer drives. RockSolid handles it where EpoxyShield would have lifted. The premium was worth it for our use.
Z. F6
Homeowner, Regina
★★★★★
Same-day return to service was huge for us. Garage in use the next morning instead of a week of camping vehicles outside. Fast cure made the project livable.
Y. F6
Homeowner, Regina
★★★★★
Welding bay with dropped tools and chemicals. The polycuramine has resisted abrasion and chemicals where epoxy would have shown wear. Right product for the use.
Q. F6
Hobbyist, Emerald Park
★★★★★
They explained the working-window discipline at quote, recommended pro install even though Rust-Oleum sells it DIY-marketed. The result is better than DIY could have produced.
X. F6
Homeowner, White City
From the blog
Concrete Guides & Articles
Practical reading on planning, finishes and caring for concrete in Regina.
