When a homeowner wants a recognizable coating brand installed the way it's meant to be, Rust-Oleum EpoxyShield and RockSolid polyurea deliver. We handle the slab grinding, the full primer-to-topcoat sequence, and the cure windows that separate a coating that holds from one that peels at the tire tracks. Every project includes a free written estimate with a firm finish date.
Rust-Oleum is the household name in concrete coatings, and that recognition is exactly why so many DIY attempts end in peeling. The product itself is solid, but the retail kit assumes a clean slab and a warm garage in summer, not the real conditions most Regina homeowners face.
When epoxy garage floors are done right, the slab gets mechanically ground or shot-blasted, the primer and topcoat go down at the right temperature, and the flake broadcast happens at the exact moment the base coat is ready. Miss any step and the coating fails at the tire line within months.
The RockSolid polyurea option is the faster-cure alternative, back in service in roughly a day, with a harder topcoat that shrugs off salt and abuse. Both systems demand the same prep discipline we bring to all our garage floor and brand coating work.
On the job
The sequence
Installing Rust-Oleum Coatings Step by Step
Assess the slab and choose the system
We inspect the concrete, measure moisture, and decide whether EpoxyShield (epoxy) or RockSolid (polyurea) fits the use and the downtime window.
Grind the slab to profile
Mechanical grinding or shot-blasting removes the top layer, opens the pores, and creates the surface texture the coating bonds to. Cracks and pits get repaired.
Apply primer, body, and topcoat
The full Rust-Oleum system goes down in sequence: primer, base coat, broadcast flake or polyurea, and topcoat, all at the working temperature and timing the manufacturer requires.
Cure and hand over
The coating cures to full strength, you get the exact date foot traffic and vehicles are safe, plus the cleaning and maintenance routine that keeps the finish performing.
Two products, two timelines
Choosing Between EpoxyShield and RockSolid
EpoxyShield is the proven epoxy choice, the floor most people picture when they think Rust-Oleum. Installed with proper slab prep and the full coat sequence, it delivers a tough, sealed, flake-finished surface at a reasonable cost.
RockSolid is the polyurea upgrade, faster cure, harder finish, the garage ready to use in about a day. Choose this when downtime matters or the floor takes serious abuse. Both rely on the same prep discipline as our broader polyaspartic floor and commercial epoxy work.
EpoxyShield vs RockSolid, why professional installation matters, and what to expect.
Because the kit is the easy part. EpoxyShield is the same product either way; the difference is mechanical slab prep, working temperature, the full coat sequence and the cure timing. Skip those and the coating peels.
EpoxyShield is an epoxy system, proven and cost-effective. RockSolid is a polyurea, harder, faster-curing, back in service in about a day. We pick based on use and downtime.
Yes, when installed pro-grade. The product chemistry resists road salt and hot-tire pickup; what fails is the bond when the slab was not prepped right. We grind every floor before any coating goes down.
Depends on the system. RockSolid polyurea is back in service in roughly a day; EpoxyShield wants a longer cure for full traffic. We hand over the exact dates with each install.
Yes, with proper prep. We grind back the failed coating, repair the slab, and rebuild the system the way it should have been done the first time, so the new coating actually bonds and holds.
Client reviews
What Regina Homeowners Say About Rust-Oleum Floors
Tried the kit a few years back, it peeled at the tires by spring. They ground it back, prepped properly and put down the same Rust-Oleum brand and it has held.
H. A.
Homeowner
★★★★★
RockSolid for the polyurea cure speed. Down one weekend, parking on it the next. Hard topcoat shrugged off a winter of salt without any wear at the door.
S. A.
Garage owner
★★★★★
Pro install of EpoxyShield with the broadcast flake. Looks like a showroom and dropped tools have not chipped it once.
M. O.
Auto enthusiast
★★★★★
Coated three rental garages in a week. Same Rust-Oleum brand the tenants recognise, but installed so it actually lasts. No callbacks.
P. W.
Property manager
From the blog
Concrete Guides & Articles
Practical reading on planning, finishes and caring for concrete in Regina.
A garage coating that lasts, whether you choose EpoxyShield epoxy or RockSolid polyurea. Tell us how you use the space and we will install it pro-grade with a written, itemized quote.
