When the ready-mix truck parks at the curb and the pour point is fifty feet away through a gate, a side yard, or down into a basement, a line pump closes that gap. Rubber and steel hose sections connect at ground level, routed wherever the site allows, and concrete flows continuously to the placement crew. No boom required, no premium for vertical reach you don't need. Regina Concrete operates line pumps with experienced operators on every job, and every booking starts with a free on-site assessment.
A line pump sits on the ground beside the ready-mix truck. Hose sections thread together in whatever configuration the site demands, straight runs across a backyard, a bend through a side gate, a drop through a basement window opening, and concrete travels from the pump outlet to the nozzle at the far end. The hose can reach hundreds of feet when the mix design and pump pressure allow, making it practical for large slab pours, foundation placements, and any flatwork where the truck simply cannot park close enough for a chute drop.
Basement floor pours are a natural fit. Rather than wrestling with an awkward chute angle through a narrow window or relying on wheelbarrows, the hose feeds directly into the space and the crew works the nozzle across the floor. The same logic applies to backyard patios behind a fence line, garage slabs on lots with tight side clearances, and commercial slab pours where the truck must stay on the street. Wherever the concrete needs to travel horizontally rather than vertically, line pump handles it at a fraction of the cost of a boom unit.
For projects that do require vertical reach or obstacle clearance above grade, see boom pump service. Contractor crews who need equipment without an operator can review pump rental options. The full scope of ready-mix concrete supply pairs directly with line pump bookings, and our concrete pumping overview covers how we select the right equipment for each job.
Recent work
From truck to slab
Line Pump Setup and Pour Sequence in Regina
Site read and hose routing plan
Before the pour date, we walk the site with the GC or homeowner. We note where the ready-mix truck will park, map the hose path from pump to pour point, flag any tight corners or surface changes the hose needs to clear, and confirm the total run length against the pump's pressure rating.
Pump truck arrival and line assembly
The pump truck positions at the planned spot. Hose sections are coupled together along the mapped route, the nozzle end is placed at the pour zone, and the operator checks all connections before the truck backs in.
Grout prime, then concrete flow
A grout slurry is pushed through the assembled hose first to coat the interior and prevent the concrete mix from sticking or segregating on the first pass. Once the line is primed, concrete flows at a rate the placement crew can manage, with the operator adjusting pressure as needed.
Cleanout and site departure
When the pour is complete, a foam or sponge ball is driven through the hose with water or compressed air, flushing residual concrete out cleanly. Hose sections are broken down, loaded, and the pump truck leaves the site without leaving concrete debris behind.
Cost and capability
Why Line Pump Is the First Choice for Most Flatwork
The economics of line pump are straightforward: the equipment is simpler than a boom unit, so the hourly rate is lower and the setup time is shorter. On a standard residential slab pour in Regina, choosing line pump over boom pump when the job fits within line pump's reach can cut the pumping cost significantly. That saving matters on tight project budgets, and it doesn't come at any cost to concrete quality or placement speed.
Capability-wise, a line pump handles the volume and flow rate that most residential and light commercial pours require. A backyard concrete patio in Pilot Butte, a basement floor in White City, a garage slab in Emerald Park, these are exactly the jobs line pump was built for. The hose routes around fences, through doorways, and across uneven ground without the overhead clearance concerns that limit a boom arm.
When a project genuinely needs vertical reach, a second-storey pour, a placement over an existing structure, or a site where the hose run would exceed practical limits, we'll say so and quote a boom unit instead. That honest equipment match is part of how we estimate. See the concrete cost guide for pumping cost context, check the concrete calculator to estimate your slab volume, and read how concrete estimates work before your first call. For warehouse or industrial slab pours that need line pump, the warehouse concrete page covers those project types.
Hose length, basement access, pricing and when line beats boom.
Hose can be assembled to substantial lengths depending on the pump's pressure capacity and the concrete mix being placed. Most residential and commercial pours fit easily within standard line length; we confirm reach during the site assessment.
Yes, often the best option for basement placement. The hose can be run down a window opening, through an exterior door, or through a basement walkout to deliver concrete directly to the basement floor area without chute access.
Usually yes, significantly cheaper. The equipment cost is much lower and the setup is simpler. For projects within line pump's capability (ground-level reach), it is almost always the better value.
Clear the planned hose route, identify any sharp turns the hose cannot handle, and have the placement crew positioned. We confirm the prep details when booking.
Typically a setup fee plus hourly rate. Line pump rates are lower than boom pump rates reflecting the lower equipment cost. The quote covers expected pour duration; longer pours bill additional time.
Client reviews
What Regina Contractors Say About Their Line Pump Service
Line pump for a backyard patio that the truck could not reach by chute. Hose run through the side gate, no boom needed, way less than a boom would have cost. Right tool, right price.
Z. N5
Slab Contractor, Regina
★★★★★
Basement floor pour with line pump fed through a window opening. Concrete delivered directly to the placement zone, no awkward chute angle. Operator made it look easy.
Y. N5
Foundation Contractor, Regina
★★★★★
Multiple slab pours on a custom build, line pump dispatched for each. Consistent quality, on-time arrival, and the operator was the same on every visit. Real relationship.
Q. N5
Home Builder, Emerald Park
★★★★★
They recommended line pump when we asked about boom pump, saved us real money on a project where line had the reach. Honest spec, smaller bill, same quality.
X. N5
Commercial GC, White City
From the blog
Concrete Guides & Articles
Practical reading on planning, finishes and caring for concrete in Regina.
Give us the pour location, the placement zone dimensions, and your target pour date. We'll assess the hose route and send a firm written quote within one business day.
